23
Using the Printer
Checking the Printer Driver
The PocketJet printer uses the LaserJet IIP printer driver. It
can also use the LaserJet II printer driver in many instances
where a IIP driver is not available. Make sure that one of
these drivers is installed and selected on your computer or
available within your DOS application.
CAUTION:
Do not use the LaserJet IIP Plus driver. It is
not compatible with this printer in all situations.
Installing a Printer Driver
If you are using the Microsoft Windows, Windows NT or OS/2
operating environment, follow the instructions in your
Windows, Windows NT or OS/2 user’s guide for installing a
LaserJet IIP or LaserJet Series II printer driver. This section
gives brief instructions for installing a printer driver using
Windows 3.1 (see below) or Windows 95 (see page 24).
If you are using DOS, see “Selecting a Printer” on page 25.
Windows 3.1
Follow these instructions to install a printer driver using
Windows 3.1.
You may need your Windows installation disks or CD-ROM to
install a printer driver. Have them ready to use.
NOTE:
The DOS print utility disk included with the
complete printer kit does not contain any drivers.
1 At the Windows Program Manager, double-click the
Main icon. Double-click the Control Panel icon. Double-
click the Printers icon.
2 At the Printers window, click the Add button.
A List of Printers appears in the lower part of the window.
3 Scroll through the List of Printers until you find the
HP LaserJet IIP (or HP LaserJet Series II) printer. Click
the HP LaserJet IIP and then click the Install button.
Using the Printer
CHAPTER
2
To Next Page
Loading...
