1
Safety Information
Safety Precautions
◆ Avoid placing the printer in direct sunlight or dusty
environments. Avoid high temperatures and rapid
changes in temperature or humidity.
◆ Avoid use in areas of high vibration.
◆ Because the printer uses a thermal printing method, it
produces heat during operation. Be sure to place it
where it will receive adequate ventilation.
◆ Don’t allow moisture to come in contact with the printer,
accessories, the AC adapter or the AC power cord.
Outdoor Use Warning
To reduce the risk of electric shock, do not expose this
printer, its AC adapter or the power cord to rain or moisture.
Caution: Using AC Power
To use AC power (with or without battery installed), you must
use the AC adapter supplied with the printer.
With the AC adapter, you can connect the printer to 110 -
240 volt power outlets. The adapter automatically accepts
the correct voltage when connected.
Check the standard power plug configurations that are
used in your country. If the appropriate power cord is not
included with your printer, notify your local reseller.
United
Kingdom
Australia and
New Zealand
U.S.A. and
Canada
Continental
Europe
Use an SEV approved
plug in Switzerland.
Safety Information
To Next Page
Loading...
