61
Printer Commands
This appendix contains a table of printer commands
grouped under these topics:
◆ Reset
◆ Page control
◆ Orientation
◆ Margins and length
◆ Vertical spacing
◆ Horizontal spacing
◆ Cursor positioning
◆ Symbol set selection
◆ Font selection and management
◆ End of line handling
◆ Push/pop position
◆ Raster graphics
◆ Macros
◆ Miscellaneous
The Printer command codes listed in this appendix are not
used for normal printing from a Windows application or from
many DOS-based applications.
When you are printing from a DOS application that does not
offer any printer selection options, you may be able to
control the features of the printer by embedding the PCL4
printer command codes directly into your document.
APPENDIX
A
Printer Commands
To Next Page
