27
Using the Printer
Printing
You MUST charge the battery before using the printer the
first time. For instructions, see page 9.
1 Make sure that you have installed a charged
battery or have connected the printer to an AC
power outlet.
2 Turn the printer on by pressing the main switch
once quickly. The red POWER indicator lights up. (If
you are using the battery, the green BATTERY indicator
also lights up.)
See Figure 13.
3 Print one or more pages from a software
application on your computer.
The green DATA indicator light blinks to indicate that
the printer is receiving data from your computer.
4 Insert a sheet of thermal paper into the paper
input slot. Place the print side of the paper away
from you, so that it faces the rear of the printer.
See
Figure 14.
NOTE:
You can print on only one side of thermal
paper. This is the smooth, coated side. For more
information, see “Tips on Using Paper” on page 33.
FIGURE 13. Turning on the printer.
One quick press
Red POWER light
POWER
DATA
BATTERY
CHARGE
REFRESH
ON
OFF
Green BATTERY light
To Next Page
Loading...
