103
3
Taking Pictures
2
Use the four-way controller (
2345
) to select
X
.
3
Press the
4
button.
The camera enters the X mode.
Turn the camera 90
º
counterclockwise and
align your first picture.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.78).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to compose
the second image. Repeat Steps 4 and 5 to take the second image.
The stitched first and second image appears on the display for one
second (Instant Review), and then is saved.
•
To minimize distortion when taking the second image, turn the camera so
that it pivots around the right edge of the preview guide on the screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Recognition function is activated (p.78), it works only
when taking the first image.
• The number of recorded pixels for images captured with X mode is
fixed at f (2592 × 1944).
38
38
1
22
OK
Exit
e_kb484.book Page 103 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
