Pentax X70 - Customizing Camera Buttons; Assigning Functions to Green Button

140
3
Taking Pictures
You can assign one of the following functions to the Green button:
[Green Mode] (p.80) or [Fn Setting] (p.141). You can activate the
assigned function by just pressing the Green button.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Press the four-way controller
(23) to select [Green Button].
3 Press the four-way controller (5).
The [Green Button] setting screen appears.
4 Use the four-way controller (23)
to select the function you want to
register.
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
Setting the Green Button
Assigning a Function
[Green Mode] is registered as the default setting.
Rec. Mode
MENU
Cancel
3/4
Memory
Green Button
Blink Detection
Digital Zoom
Instant Review
Interval Shoot
Green Button
Q
9
MENU
Cancel
OK
OK
Fn Setting
Green Mode
e_kb484.book Page 140 Wednesday, March 18, 2009 5:23 PM