213
7
Settings
Set whether to display the guides in playback mode or when setting the
capture mode.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23)
to select [Guide Display].
3
Use the four-way controller (
45
) to select
O
(On) or
P
(Off).
O(On): The mode guides are displayed.
P (Off): The mode guides are not displayed.
4
Press the 3 button.
The camera returns to A mode or Q mode.
You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• One of the 3 PENTAX logos
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
Setting the Guide Display
Changing the Start-up Screen
Setting
Format
Reset
Delete all
3/3
MENU
Exit
Guide Display
e_kb484.book Page 213 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
