135
3
Taking Pictures
This specifies whether Blink Detection works when you use the Face
Recognition function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Blink
Detection].
3
Use the four-way controller (45)
to select O (On) or P (Off).
O(On) Blink Detection function works.
P (Off) Blink Detection function does
not work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays
the image for 1 second).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
Setting Blink Detection
Blink Detection 1p.67
Setting the Instant Review
Rec. Mode
MENU
Exit
3/4
Memory
Green Button
Blink Detection
Digital Zoom
Instant Review
Interval Shoot
e_kb484.book Page 135 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
