Pentax X70 - Default Settings

249
9
Appendix
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is
turned off.
No : The setting returns to the default setting when the camera is
turned off.
* : The setting depends on the [Memory] setting (p.147).
—:N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.215).
No : The setting is saved even after reset.
—:N/A
[ARec. Mode] Menu Items
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Image Tone Bright Yes Yes p.119
Recorded Pixels E (4000×3000) Yes Yes p.120
Quality Level D (Better) Yes Yes p.122
White Balance F (Auto) * Yes p.123
Sensitivity AUTO (50-800) * Yes p.125
ISO Corction in AUTO 50-800 * Yes p.127
AF
Setting
Focusing Area J (Multiple) Yes Yes p.116
Auto Macro O (On) Yes Yes p.117
Focus Assist O (On) Yes Yes p.118
AE Metering L (Multi-segment) * Yes p.128
Flash Exp. Comp. ±0.0 Yes Yes p.129
Movie
Recorded Pixels F (1280×720/15fps) Yes Yes p.145
Movie SR O (On) Yes Yes p.146
Bright Area Adj. P (Off) Yes Yes p.130
Shake Reduction O (On) Yes Yes p.132
e_kb484.book Page 249 Wednesday, March 18, 2009 5:23 PM