117
3
Taking Pictures
4
Press the four-way controller (5).
The pull-down menu appears.
5
Use the four-way controller (23) to change the
[Focusing Area] setting.
6
Press the 4 button.
The setting is saved.
7
Press the 3 button twice.
The camera is ready for taking pictures.
When [Auto Macro] is on, the focus is adjusted to the macro range as
necessary, regardless of the focus mode setting. However, when the
focus mode is set to (1cm Macro), focus is only adjusted for the 1-cm
macro range (1cm - 30cm).
When set to off and the focus mode is set to = (Standard), the AF
operates only in the standard range, and focusing is not performed in the
macro range. When the focus mode is set to q (Macro) or (1cm
Macro), the focus is only adjusted in the respective macro range.
Focusing is not performed in the standard range.
4
Use the four-way controller (23)
to select [Auto Macro].
•In C (Movie) and N (Frame Composite) modes, [Focusing Area]
cannot be set to W.
•In S (Fireworks), 9 (Green) and I (Auto Picture) modes,
[Focusing Area] is fixed at J.
Setting the Auto Macro
MENU
Cancel
OK
OK
0.0
Auto Macro
Focus Assist
Focusing Area
AF Setting
MENU
Auto Macro
Focus Assist
Focusing Area
AF Setting
e_kb484.book Page 117 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
