119
3
Taking Pictures
Set the image tone of still pictures.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Image Tone].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a finishing tone.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Setting the Image Tone
When [Monochrome] is selected, [Tone Adjustment] appears on the [A
Rec. Mode] menu for setting the tone of monochrome images instead of
[Saturation].
Rec. Mode
MENU
1/4
Cancel
OK
OK
Recorded Pixels
Image Tone
Quality Level
Sensitivity
ISO Corction in AUTO
White Balance
Bright
Natural
Monochrome
ISO50-400
AUTO
AWB
e_kb484.book Page 119 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
