Pentax X70 - Setting Shake Reduction

132
3
Taking Pictures
You can set this function to correct for camera shake during shooting. If
the Shake Reduction is set to O (On), the camera automatically corrects
for camera shake in the images you shot. The default setting is O (On).
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Shake
Reduction].
3 Use the four-way controller ( 45 ) to
switch between
O (On) or P (Off).
O(On) Automatically corrects for
camera shake.
P (Off) No correction for camera
shake.
The setting is saved.
4 Press the 3 button.
The camera returns to capture status.
Setting the Shake Reduction
MENU
2/4
0.0
Rec. Mode
Exit
AE Metering
AF Setting
Flash Exp. Comp.
Bright Area Adj.
Shake Reduction
Movie
e_kb484.book Page 132 Wednesday, March 18, 2009 5:23 PM