112
3
Taking Pictures
1
Select a capture mode.
2
Press the b button.
The built-in flash pops up and begins
charging. b (Red) blinks on the display
while charging. When the flash is fully
charged, b appears on the display. (Not
displayed in , mode)
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera is
focused.
4
Press the shutter release button fully.
The flash discharges and the picture is taken.
5
Push the flash down to retract.
Using the Flash
b button
e_kb484.book Page 112 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
