Pentax X70 - Page 123

121
3
Taking Pictures
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Recorded
Pixels].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to change the number of recorded
pixels.
5 Press the 4 button.
The setting is saved.
6 Press the 3 button.
The camera returns to capture status.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at E.
• The number of recorded pixels for images captured in C (Half-length
Portrait) or N (Frame Composite) is fixed at h.
• The number of recorded pixels for images captured in c (Digital SR)
or X (Digital Wide) mode is fixed at f. (The number of recorded
pixels will be h if you exit the X mode without taking the second
picture.)
Recordable Image No.
MENU
Cancel
OK
OK
12
Recorded Pixels
Image Tone
Quality Level
Sensitivity
ISO Corction in AUTO
White Balance
12 M
3:2
16:9
1:1
7 M
5 M
e_kb484.book Page 121 Wednesday, March 18, 2009 5:23 PM