225
8
Connecting to a Computer
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select [MSC].
6
Press the 4 button.
The setting is saved.
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Unless otherwise specified, select MSC when connecting the X70 to
your computer.
Go to the following pages depending on your computer.
Connecting to a Windows PC (p.226)
Connecting to a Macintosh (p.234)
MSC (Mass Storage Class) and PTP (Picture Transfer Protocol)
Setting
2/3
MENU
Cancel
OK
OK
MSC
USB Connection
Video Out
Brightness Level
Auto Power Off
Quick Zoom
PTP
Power Saving
3min.
5sec.
e_kb484.book Page 225 Wednesday, March 18, 2009 5:23 PM
To Next Page
Loading...
