Pentax X70 - Page 67

65
3
Taking Pictures
6 Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display for one second (Instant Review: p.67)
and is saved to the SD Memory Card or the built-in memory.
• Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically (p.80).
• The following restrictions apply in I mode:
- You cannot turn the Face Recognition function off.
- The [Focusing Area] setting is fixed at J (Multiple).
-The I (Flower) mode cannot be selected when using Digital Zoom
or Intelligent Zoom.
- If the A (Night Scene) mode is selected when the flash mode is ,
(Auto), the flash mode automatically changes to a (Flash Off).
- If the A (Night Scene) mode is selected when the flash mode is set
to a mode other than , (Auto), the settings before selection are
used. However, the flash is set to G (Slow-speed Sync).
- When the drive mode is set to (Continuous Shooting(L)),
(Continuous Shooting(M)) or (Continuous Shooting(H)), pictures
are taken continuously in the appropriate shooting mode selected for
the first picture.
- The camera automatically focuses on the subject when the [Auto
Macro] is set to on, and the focus mode is set to = (Standard) or
q (Macro).
LL MM
HH
e_kb484.book Page 65 Wednesday, March 18, 2009 5:23 PM