peplink Balance 30 - 5.4.3 Rear Panel Appearance; 5.4.4 Unit Label Appearance

PePLink Balance Series v4.0 User Manual
Page 16
5.4.3 Rear Panel Appearance
Connector Ports
RS-232 Port
Reserved for engineering use
USB Ports
Reserved for engineering use
Power Connector
AC input 110/220V
Switches
Power Switch
- To hold pressing the key for 4 secs will power down the unit
- When the unit is powered off, press it will power on the unit
Reset Switch
Press and release once to reset the system
5.4.4 Unit Label Appearance
USB Ports
RS-232 Port
Power Connector
Serial Number and
LAN MAC Address
Power Switch
Reset Switch