peplink Balance 30 - 6.2.2 Windows XP DHCP Client Configuration; 6.2.3 Windows Vista DHCP Client Configuration

PePLink Balance Series v4.0 User Manual
Page 19
6.2.2 Windows XP DHCP Client Configuration
1. Select Start Menu > Control Panel > Network and Internet Connections.
2. Select Set up or change your Internet Connection.
3. Select the Connection tab, and click the Setup button.
4. At the Location Information pop-up menu, select Cancel.
5. At the New Connection Wizard screen, click Next.
6. Select Connect to the Internet and click Next.
7. Select Set up my connection manually and click Next.
8. Select the following checkbox:
Connect using a broadband connection that is always on
9. Click Next.
10. Click Finish to close the New Connection Wizard.
6.2.3 Windows Vista DHCP Client Configuration
1. Connect the computer and the PePLink Balance’s LAN interface with an Ethernet
cable.
2. The following screen will be displayed on
the computer screen. Choose “Work”.
3. Click “Close” to finish.