If ISC BIND 8 or 9 is being utilized in the zone file mycompany.com, then the addition of
the following lines suffice:
www IN NS balancewan1
www IN NS balancewan2
balancewan1 IN A 202.153.122.108
balancewan2 IN A 67.38.212.18
202.153.122.108 and 67.38.212.18 represent the WAN1 and WAN2 Internet IP addresses
of PePLink Balance, respectively. The values of the IP addresses are fictitious and for
illustration only; the actual IP addresses in implementation will likely be different.
Hosting the complete domain at PePLink Balance
To host your own DNS server, contact the DNS registrar to have the NS records of the
domain (e.g. “mycompany.com”) point to your Balance’s WAN IP addresses. Then follow
these instructions:
1. Under Network > Inbound Access > DNS Settings, create a new domain, for
example “mycompany.com”.
2. Create NS records named “ns1”, “ns2”, etc. The IP addresses are the Balance’s
DNS server addresses (same as above).
3. Create the corresponding A, CNAME, MX and TXT records as you wish. The A
record resembles the one below:
To Next Page
Loading...
