Pepperl+Fuchs AS-I 3.0 PROFIBUS User Manual

AS-I 3.0 PROFIBUS
G
ATEWAY IN STAINLESS
S
TEEL
FACTORY AUTOMATION
MANUAL

Pepperl+Fuchs AS-I 3.0 PROFIBUS Specifications

General

Brand	Pepperl+Fuchs
Model	AS-I 3.0 PROFIBUS
Category	Gateway
Language	English

Summary

Introduction

Safety Information

Covers intended use, general safety, and disposal procedures.

Installation Guide

Mounting the Gateway

Step-by-step guide for mounting the gateway on a 35mm DIN rail.

Commissioning Procedures

Setting PROFIBUS-DP Address

Guide to setting the PROFIBUS DP address for the gateway.

Connecting AS-i Slaves

Troubleshooting AS-i Slaves

Identifying Faulty Slaves

Quick Setup Guide

AS-i Addressing

On-Site Parameterization

Electrical Connections

Terminal Overview

AS-i and Power Supply Terminals

Specifies terminal assignments for AS-i circuits and power supply.

PROFIBUS and Diagnostics Interfaces

Chip Card Usage

Indicators and Buttons

Advanced Diagnostics

Slave Diagnostics

Tools for diagnosing slave errors and telegram quality.

Fault Detector Functions

Covers duplicate address, earth/ground fault, noise, and over-voltage detection.

New Generation Gateway Features

PROFIBUS DP Operation

DP Telegrams and Diagnostics

Explains DP telegram structure, EC-flags, delta lists, and diagnostic descriptions.

Cyclic Data Configuration

I/O Data Details

System Startup with AS-i Control Tools

Siemens S7 Integration Example

Hardware Configuration

SIMATIC Step 7 Configuration

Gateway Parameter Settings

General DP Parameters

Device-Specific Parameters

AS-i I/O Data Mapping

AS-i Flags (Input Bits 7-4)

System Behavior on AS-i Config Error