Pepperl+Fuchs AS-I 3.0 PROFIBUS - Page 58

26.9.2013
58
AS-i 3.0 PROFIBUS Gateway in Stainless Steel
System startup using AS-i Control Tools
! Select ’Ethernet Diagnostic Interface Stainless Steel Gateways’ and con-
firm with ’OK’.
! If the IP address of the gateway is known, enter it directly.
! Otherwise, use the button ’Search and Configure…’.
The found/available Gateways can be selected via the pulldown menu ’Curr.
IP Address’.
⇒ connection parameters can be configured via the 'Settings...' button.