Pepperl+Fuchs VBG-PB-K25 - Write 4 7.3-Slave Out.data (WR_7 X_OUT_X); Read 4 7.3-Slave Out.data (RD_7 X_OUT_X)

AS-Interface
Command Interface
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Issue date - 21.12.2005
34
8.2.1.6 Write 4 7.3-Slave out.Data (WR_7X_OUT_X)
With this command the four 16 bit channels of four AS-i output slaves with succe-
sive addresses according to slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-
7.A.A)
can be written.
8.2.1.7 Read 4 7.3-Slave out.Data (RD_7X_OUT_X)
With this command, the four 16 bit channels of four AS-i output slaves with succe-
sive addresses according to slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-
7.A.A) can be read.
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 54
16
2 T – circuit
3 – 0 1st slave address
4 1st slave, channel 1, high byte
… …
35 4th slave, channel 4, low byte
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 54
16
2 T result
Request
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 55
16
2 T – circuit
3 – 0 1st slave address
Response
byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 55
16
2 T result
3 1st slave, channel 1, high byte
… …
34 4th slave, channel 4, low byte