SWITCHES
To adjust the steering wheel, PUSH
and HOLD the lever down fully. Push
or pull the wheel to the desired height
and angle, then PUSH the lever back
into the locked position.
Steering Column Locked
Steering Column Unlocked
2. Turn Signal/High Beam Switch
NOTE
The ignition
key must be turned to ON
for the signal/switch to operate.
The lever-action
turn signal/high beam
switch is located on the left side of
the steering column. Each time a turn
indicator is activated the buzzer emits
a short beep.
Turn
Signals
Turn Signal
• To signal a right turn, push the
lever forward (clockwise).
3
(04/13) Y53-6047–2C 3-69
To Next Page
Loading...
