PREVENTIVE MAINTENANCE SCHEDULE
PREVENTIVE MAINTENANCE (PM) INTERVALS
SYSTEM COMPONENT MAINTENANCE TASK
Recommended PM
Interval
I A B
C
D E
Disc Brakes
(Bendix®)
Brake pads Inspect; replace as required. X
Brake disc/rotor
Inspect for visible cracks, heat checking, galling, or scoring of
surface. Check for runout (max allowable is 0.002 in.).
X
Caliper sliding
function Ensure caliper slides freely with no obstructions or excessive
play.
X
Caliper slide
pins Inspect protective caps of the guide pins for damage or
cracking.
X
System operation
Check operation; inspect as per manufacturer’s service
literature.
X
5
(04/13) Y53-6047–2C 5-21
To Next Page
Loading...
