PREVENTIVE MAINTENANCE SCHEDULE
PREVENTIVE MAINTENANCE (PM) INTERVALS
SYSTEM COMPONENT MAINTENANCE TASK
Recommended PM
Interval
I A B
C
D E
Tires
and
Wheels
Tires
Check ination pressure (shown on page 5-135). Weekly “cold” using calibrated gauge
Inspect for
cuts, irregular wear, missing lugs, sidewall damage,
etc.
X
Disc wheels
Inspect the wheel disc for any cracks or surface irregularities.
Inspect the rim edge and bead seat area for damage. Replace
any damaged wheels - DO NOT ATTEMPT TO REPAIR.
X
Demountable rims
Inspect the mounting ring, rim gutter, side ring, and lock ring for
damage; replace as required.
X
Wheel nuts
and studs
Check the tightness of the fasteners and tighten the fasteners
to the specied torque as required (shown on page 5-141).
X
Inspect for
damaged hex corners, stripped or damaged
threads, and excessive corrosion; clean or replace as required.
X
5
(04/13) Y53-6047–2C 5-25
To Next Page
Loading...
