CAB
CAUTION
Do not aim the water jet directly at door
locks or latch. Tape the key holes to
prevent water from seeping into the
lock cylinders. Water in lock cylinders
should be removed with compressed
air. To prevent locks from freezing in
the winter, squirt glycerin or lock deicer
into the lock cylinders.
Washing
the Exterior
1. Begin by
spraying water over the
dry surface to remove all loose dirt
before applying the car wash and
wax solution.
° Do not wash the vehicle in
direct sunshine.
° Do not spray water directly
into the cab vents.
2. Using soapy
water, wash the
vehicle with a clean soft cloth or
a soft brush made for automotive
cleaning.
° Use cool or warm water and
a mild, household type soap.
Strong industrial detergents
and cleaning agents are not
recommended.
° Do not use stiff brushes, paper
towels, steel wool, or abrasive
cleaning compounds because
they will scratch painted,
plated, and
polished metal
surfaces.
3. Rinse surfaces
frequently while
washing to ush away dirt that
might scratch the nishes during
the washing operation.
4. Wipe everything
dry with a
chamois to avoid water spots.
° To prevent water spotting, dry
off the cosmetic surfaces with
a clean cloth or chamois.
5. Remove road
tar with an
automotive type tar remover or
mineral spirits.
6. After cleaning
and drying, apply a
quality automotive wax.
5
(04/13) Y53-6047–2C 5-65
To Next Page
Loading...
