ENGINE
7. Reinstall the dipstick and twist to
Topping
Up the Engine Oil Pipe and Hose Clamps
lock it
in place.
1. Top up with oil, if necessary, via
Use the
following table for torque
the ller
opening. Use the correct
specications to
check pipe and hose
grade in
the correct quantity. For
clamps.
oil replacement,
please see engine
Operator’s Manual included with
this chassis.
2. After topping
up, wait 1 minute and
check the oil level again.
3. Reinstall the
oil ll cap and twist
to lock it in place.
1. Engine Oil High Level
2. Engine Oil Low Level
5
5-94 Y53-6047–2C (04/13)
To Next Page
Loading...
