ENGINE
Pipe and Hose Clamp Torque Values
APPLICATION
APPROVED CLAMP TORQUE
Nm Lb-In
Radiator and
Heat Exchanger Hoses
Constant-Torque CT-L
10.2-12.5 90-110
Heater Hoses
Constant Tension
not required not required
Air Intake
Pipes Hi-Torque HTM-L 11.3-14.2 100-125
Charge Air
Intake Hoses Flex Seal 667
7.9-11.3 70-100
B9296 6-7 50-60
Fuel, Oil
and Water Heat Exchangers (for
hoses less than 9/16 diameter)
Miniature 3600L 1.1-1.7 10-15
Exhaust Clamps
Breeze V-Band 54 480
5
(04/13) Y53-6047–2C 5-95
To Next Page
Loading...
