INSTRUMENT PANEL
3. Clock
The clock
presents either the home
time or the local time when the clock is
set. If the clock is not set, the words
"SET CLOCK" will appear when the
ignition is turned ON. If the clock does
not get set, the message will disappear
and no time will be displayed. The time
can be set while the "SET CLOCK"
prompt is showing or it can be set by
navigating to the settings menu via the
Menu Control Switch.
The clock
will display either the local
or the home time of day.
Set the
Home time to the current
time at the base of operation. Set
the local time according to a time
zone of destination. Reset the local
time anytime the destination location
changes and you need to use this
function.
Please refer
to Settings on page 3-27
to read
more about how to set the
clock.
4. Active Warnings
Active warnings
will appear in this
area in addition to areas around the
center of the display. Active Warnings
are those pop-up messages that have
come up on the screen and/or been
suppressed with an MCS button push.
If there are warning icons active while
the cruise control is enabled, icons
will appear on each side of the cruise
control icon. If there are multiple
warnings, the display will show how
many are active. The numbers may
change without user interaction if
individual warnings are intermittent,
time based, self correcting, or the
situation is rectied.
3
(04/13) Y53-6047–2C 3-17
To Next Page
Loading...
