Pfaff 2481-980/30 PLUSLINE - Entering the Start and End Backtacks

Preparation
9 - 7
9.08 Entering the start and end backtacks
In the manual sewing mode the start and end backtacks can be entered or altered directly.
● Switch on the machine.
● Switch on start backtack and/or end backtack (the corresponding symbol is shown as an
inverse symbol).
● Select the desired value for the number of forward stitches (A) of the start backtack.
● Select the desired value for the number of reverse stitches (B) of the start backtack.
● Select the desired value for the number of reverse stitches (C) of the end backtack.
● Select the desired value for the number of forward stitches (D) of the end backtack.