Pfaff 2481-980/30 PLUSLINE - Aligning the Light Transmitter

Adjustment
13 - 30
13.07 Aligning the light transmitter
Requirement
When the workpiece is positioned, the transmitters PS2 and PS1 should display the same
value (same receiving power).
● Switch on the machine.
● Call up the input mode.
● Call up the service menu.
● Call up the sensor menu.
● Adjust light transmitter 1 (screw 2) in accordance with the requirement.
● Switch off the machine.
Fig. 13 - 28
2
1
97%
97%
12