Sewing
10 - 4
Entering the seam program
Opens the menu for entering and altering seam programs, see Chapter 11.02 Entering the
seam program.
Input mode
Calls up the input mode.
Depending on the seam program, further symbols showing corresponding values
or selected functions may appear on the display.
In addition, when the bobbin thread monitoring function is activated, the number
of remaining stitches is shown, and when the speed display function is activated
the current speed is shown, see Chapter 13.11.03 List of parameters.
● Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal.
10.03 Error messages
If an error occurs, the text "ERROR" appears on the display, together with an error code. An
error message is caused by incorrect settings, defective elements or seam programs and by
overload conditions.
For an explanation of the error codes see Chapter 13.12 Explanation of the error messages.
● Eliminate the error.
● Confirm error elimination.
To Next Page
Loading...
