Sewing
10 - 3
10.02 Programmed sewing
In the programmed sewing mode the seam parameters are set in a seam program. The pro-
gram number selection function is used to call up a seam program. The selected program
number, an sketch of the seam with the number of programmed seam sections, the current
seam section and the parameters for the current seam section are displayed. The parameters
for the current seam section cannot be changed directly.
● Switch on the machine.
● Select a seam program, see Chapter 9.11 Selecting the seam program.
Explanation of the functions and displays
Seam program selection
Opens the menu for entering the seam program number or for selecting the manual sewing
mode, see Chapter 9.11 Selecting the seam program.
Edge guide postion
Displays the current position of the edge guide.
Stitch length
Displays the current stitch length.
Number of seam sections
Displays the total number of seam sections in the seam program.
Selecting seam sections
This function is used to select the seam sections of the current seam program.
Current seam section
Display and selection of the current seam section using the number keys.
Bartack suppression
When operated, the next bartack is suppressed.
3
0.0
To Next Page
Loading...
