Preparation
9 - 11
9.11 Selecting the seam program
With the seam program selection function it is possible to select either manual or
programmed sewing. The programmed sewing function is called up by selecting a seam pro-
gram number from 0-65.
● Switch on the machine.
● Call up the seam program selection menu.
● Enter the seam program number with the number keys.
Or
● Scroll through the seam program numbers.
● Conclude the input and change to the programmed sewing mode with the selected seam
program number.
Or
● Take over the selected program number and change into the seam programming function,
see Chapter 11.02 Entering the seam program.
Or
● Select the manual sewing mode. The program number is not taken over.
0 - 65
To Next Page
Loading...
