Pfaff 2481-980/30 PLUSLINE - Adjusting the Electric Edge Guide

Adjustment
13 - 33
Fig. 13 - 30
13.10 Adjusting the electric edge guide
Requirement
When a seam depth of 1.0 mm is selected (using the control panel), guide unit 3 should be
at a distance of approximately 0.1 mm from sewing foot 4.
● Switch on the machine.
● Set the edge guide position at 1.0 mm, see Chapter 9.07 Entering the edge guide
position.
● Adjust edge guide 1 (screws 2) according to the requirement.
● Switch off the machine.
3
4
2
1
0,1 mm