Pfaff 2481-980/30 PLUSLINE - Explanation of the Error Messages

Adjustment
13 - 42
13
.12 Explanation of the error messages
Message Description
E001 Pedal not in neutral position
E003 SM 1 (for reference)
E004 SM 2 (for reference)
E009 Start inhibitor at standstill
E010 Incorrect machine class
E040 Transmitted light sensors
E045 Bobbin thread monitoring
E062 Short circuit 24V
E063 Overload switch power supply
E064 Network monitoring
E065 Extint low in operation
E066 Short circuit
E067 Power off
E068 Extint low in operation
E069 No increments
E070 Motor blocking
E071 No incremental connector
E072 No set value connector
E073 Motor running interrupted
E075 Controller locked
E092 Start inhibitor when motor running
E151 System
E155 Sewing motor
E156 Time out communication
E157 Stepping motor ramps