Adjustment
13 - 28
13.06.06 Needle thread tension release
Requirement
1. The solenoid stroke should be 1.5 mm.
2. When the solenoid 5 is operated by hand, there should be a distance of at least 0.5 mm
between the tension disks 6.
Fig. 13 - 26
● Adjust disk 1 (nuts 2) in accordance with requirement 1.
● Adjust screw 3 (nut 4) in accordance with requirement 2.
3
4
5
2
1
57-05
0,5 mm
6
To Next Page
Loading...
