Input
11 - 6
11.02.02 Entering the seam depth
As the edge sensors are arranged for sewing at right angles, if other angles to the edge have
to be sewn, a correction value must be entered.
● Switch on the machine.
● Select a program number, see Chapter 9.11 Selecting a seam program.
● Call up the seam program input function.
● Call up the seam depth input menu.
● Enter the desired seam depth.
● Call up the correction value input menu.
3
2.0
0.0
0
12
0.0
To Next Page
Loading...
