Adjustment
14 - 63
Fig. 14 - 61
1
2
● Loosen screws 2 and move switch 1 in accordance with the requirement.
● Tighten screws 2.
14.31 Electrical switches
All switches must be adjusted so that there is a little play between the
switching rollers and the switch housing when pressed.
14.31.01 Switch for the starting mechanism ( S2 )
Requirement
Switch 1 must be securely on as soon as the starting cylinder begins to pull. In program
end position switch 1 must be free.
To Next Page
Loading...
