Sewing
12 - 1
12 Sewing
Do not operate the machine without its take up lever guard 1, finger guard 2, or
eye guard 3! The hand crank 4 must be folded in during operation! The cover 5
and the bed slide 6 must be closed. The machine may only be operated when
all covers are completely installed and the belt guard cover is closed! Danger of
injury!
The machine must only be operated by appropriately trained personnel! The
operating personnel is also responsible for ensuring that only authorized
personnel are allowed into the area of potential danger around the machine.
12.01 Test seam
After any form of preparation, after all maintenance and repair work and when changing
materials a test seam is to be sewn.
12.02 Sewing with a single cycle
● Push switch 4 on the quick control panel up ( see chapter 8.05 Functions of the
quick control panel ).
● Insert the workpiece.
● Bring the foot pedal into its + 1 position which lowers the work clamp.
● Move the foot pedal into position + 2. One buttonhole will be sewn.
● Remove the workpiece or move it into its next position.
Fig. 12 - 01
5
6
2
4
1
3
To Next Page
Loading...
Need help?
General
