Sewing
12 - 2
Fig. 8 - 02
1
12.03 Sewing with a double cycle
● Push switch 4 on the quick control panel down ( see chapter 8.05 Functions of the
Quick control panel ).
● Insert the workpiece.
● Bring the foot pedal into its + 1 position which lowers the work clamp.
● Move the foot pedal into position + 2. One buttonhole will be sewn around twice.
● Remove the workpiece or move it into its next position.
12.04 Stopping the machine in an emergency
● Push the button 1 down.
To Next Page
Loading...
