Operational controls
8 - 1
8 Operational controls
8.01 On / Off switch
● Switch the machine on and off with
switch 1. When the machine is on, the
control lamp in switch 1 is lit.
Fig. 8 - 01
Fig. 8 - 02
1
1
8.02 Stop button
● In case of danger and in emergency
situations, stop the machine by pressing
the stop button 1.
The motor stops in a controlled manner
( cover thread carrier moves to highest
position ).
The machine can be restarted by switching
the On / Off switch off and then back on
again.
To Next Page
Loading...
