1
2 3
4
Embroidery – 45
To Create Text:
1. Select the Font Menu and touch a font to select it.
2. Touch the different letters to create a sequence.
3. Touch the Conrm button. The machine will
stitch the letter sequence that was saved and will
stop when the sequence is completed.
In order to repeat the sequence, press the Foot Con-
trol or the Start/Stop Button.
Save your sequence by touching the Save button.
Create Embroidery Text
File Manager
To create a text, open the font menu and touch your
desired font on the screen. You can change the font
and size of the text as desired. Once you’ve written
your text, touch the conrm button to load it into
text edit mode. Read about the various text edit
options below to learn more.
Mirror text (1)
To mirror your text sideways, touch the Mirror
Side to Side button.
Rotate text (2)
Use the different Rotation buttons to adjust the ro-
tation of the selected design(s) in one degree incre-
ments. Each touch in the center of the control wheel
will rotate the selected text(s) 90 degrees clockwise.
Text Spacing (3)
The distance between each letter can be increased or
decreased with the spacing option.
Text Shaping (4)
You can edit your written text using two different
shaping options. To do so, select a shaping option
and your text will follow the shape on the screen.
To view, open, or delete your designs saved in the
machine’s built-in memory, touch the File Manager.
Delete
When you touch Delete, the selected design(s) will
be deleted from the embroidery area. If more than
one design is selected, a pop-up message will ap-
pear.
To Next Page
Loading...
