50 – Embroidery
The Bobbin Thread Is Running Low
When the bobbin thread is running low, a pop-up
message appears giving you notice that you will
soon need to change the bobbin. This gives you an
opportunity to plan when you want to change your
bobbin.
Sound
When active, the signal for some warning alerts or
attention pop-up messages will be repeated in inter-
vals until the pop-up is closed.
Attention!
If the machine stops and this pop-up appears on the
screen you need to stop sewing. Wait a moment and
touch the conrm button when it is enabled. Check
the needle size and condition. Check for correct
threading.
Embroidery Edit Pop-up Messages
Too many designs selected. Please
remove a design and try again.
This pop-up appears for one of the following rea-
sons:
• The design combination contains too many color
blocks.
• There are too many designs in the combination.
• The design combination you are trying to make
contains too many stitches.
To Next Page
Loading...
