List of figures
Fig. 1: Position of the labels on the product 9
Fig. 2: Design HiPace 1200 standard and U version 20
Fig. 3: Slinging points for vertical transport of the turbopump without packaging 23
Fig. 4: Slinging points for horizontal transport of the turbopump without packaging 24
Fig. 5: Example: Secure against displacement and tipping caused by external vi-
brations
27
Fig. 6: Mounting orientations of the standard version, upright 28
Fig. 7: Mounting orientations of the U version, overhead 28
Fig. 8: Alignment of the fore-vacuum connection with horizontal mounting orienta-
tion
28
Fig. 9: Flange connection ISO-K to ISO-F, bracket screws 29
Fig. 10: Flange connection ISO-K to ISO-F, hexagon head screw and tapped hole 30
Fig. 11: Flange connection ISO-K to ISO-F, stud screw and tapped hole 30
Fig. 12: Flange connection ISO-K to ISO-F, stud screw and through hole 30
Fig. 13: Flange connection ISO-F, hexagon head screw and tapped hole 31
Fig. 14: Flange connection ISO-F, hexagon head screw and through hole 31
Fig. 15: Flange connection ISO-F, stud screw and tapped hole 31
Fig. 16: Flange connection ISO-F, stud screw and through hole 32
Fig. 17: Flange connection CF-F, hexagon head screw and through hole 32
Fig. 18: Flange connection CF-F, stud screw and tapped hole 33
Fig. 19: Flange connection CF-F, stud screw and through hole 33
Fig. 20: The position of the filler screws depends on the mounting orientation. Exam-
ple: Standard versions
34
Fig. 21: The position of the filler screws depends on the mounting orientation. Exam-
ple: U versions
34
Fig. 22: Example of fore-vacuum connection 35
Fig. 23: Cooling water connection 37
Fig. 24: Example: Connecting the grounding cable 39
Fig. 25: Examples: Draining operating fluid for the standard and U versions 47
Fig. 26: The position of the filler screws depends on the mounting orientation. Exam-
ple: Standard versions
48
Fig. 27: The position of the filler screws depends on the mounting orientation. Exam-
ple: U versions
49
Fig. 28: Removing the electronic drive unit 50
Fig. 29: Fitting the electronic drive unit 51
Fig. 30: Attaching the electronic drive unit 51
Fig. 31: Spare parts HiPace 1200 60
Fig. 32: Dimensions HiPace 1200 and HiPace 1200 C | DN 200 ISO-K 70
Fig. 33: Dimensions HiPace 1200 and HiPace 1200 C | DN 200 ISO-F 70
Fig. 34: Dimensions HiPace 1200 and HiPace 1200 C | DN 200 CF-F 70
Fig. 35: Dimensions HiPace 1200 U and HiPace 1200 U C | DN 200 ISO-K 71
Fig. 36: Dimensions HiPace 1200 U and HiPace 1200 U C | DN 200 ISO-F 71
Fig. 37: Dimensions HiPace 1200 U and HiPace 1200 U C | DN 200 CF-F 71
List of figures
6/74
To Next Page
Loading...
