PG Drives Technology SIGMADRIVE Series User Manual

PG DRIVES TECHNOLOGY AC TRACTION – MOTOR SET-UP
1 Motor Set-up
Alteration of these parameters is only permitted when the vehicle is not pulsing.
Ref. Parameter Programmer Text
4.1 Motor Temperature Cutback TempStrt
4.2 Motor to Vehicle Speed Ratio SpdRatio
4.3 Number of Teeth SpdTeeth
4.4 Number of Motor Poles SpdPoles
4.5 Motor Speed Minimum SPDmin
4.6 Motor Speed Boost SPDboost
4.7 Motor Speed Base (Rated) SPDbase
4.8 Motor Speed Maximum SPDmax
4.9 Minimum Voltage Vmin
4.10 Drive Voltage Minimum D Vmin
4.11 Drive Voltage Boost D Vboost
4.12 Drive Voltage Base (Rated) D Vbase
4.13 Drive Voltage Maximum D Vmax
4.14 Drive Slip Minimum D Smin
4.15 Drive Slip Boost D Sboost
4.16 Drive Slip Base (Rated) D Sbase
4.17 Drive Slip Maximum D Smax
4.18 Direction Braking Voltage Minimum BDVmin
4.19 Direction Braking Voltage Boost BDVboost
4.20 Braking Voltage Base (Rated) B Vbase
4.21 Braking Voltage Maximum B Vmax
4.22 Direction Braking Slip Minimum BDSmin
4.23 Direction Braking Slip Boost BDSboost
4.24 Braking Slip Base (Rated) B Sbase
4.25 Braking Slip Maximum B Smax
4.26 Neutral Braking Voltage Minimum BNVmin
4.27 Neutral Braking Voltage Boost BNVboost
4.28 Neutral Braking Slip Minimum BNSmin
4.29 Neutral Braking Slip Boost BNSboost
4.30 Braking Motor Speed Base (Rated) BSPDbase
4.31 Proportional Gain for Voltage Change PgainV
4.32 Proportional Gain for Outer Speed Loop PgainSpd
4.33 Proportional Gain for Inner Torque Loop PgainTrq
4.34 Ramp delay for Inner Torque Loop Ramp Trq
4.35 Proportional Gain for Voltage Change – Neutral Braking Only PgainSpN
4.36 Current Threshold CurrTH
4.37 Lower Maximum Current ImaxLow
4.38 Threshold Timer IthTime
4.39 Hill Hold Time HHtime
4.40 Hill Hold Restrained Speed HHspeed
4.41 Hill Hold Minimum Voltage HHmin
4.42 Brake End Speed BrkEndSpd
SK79646-01 55

PG Drives Technology SIGMADRIVE Series Specifications

General

Brand	PG Drives Technology
Model	SIGMADRIVE Series
Category	Controller
Language	English