Video decoding
- Pay-TV ready
(Conax embedded)
- MPEG-2 DVB compliant up to MP@ML
- Video bit rate: up to 15 Mbit/sec
- Video format: 4:3
(letter box if source is in 16:9) and 16:9
- Resolution: up to 720x576 pixels
Audio decoding
MPEG layer I / II
Ease of Installation
- Automatic program installation via
scanning
- Automatic program list update
- Program editing for personalised
installation (delete, add, move)
Ease of Use
- Direct access TV & Radio modes
- 4 Fav.list for TV programs
- 4 Fav.list for Radio programs
- Automatic recording via Timer
programming and Easy recording for
VCR and DVD+/- RW
- Now & Next ESG
- Electronic Program Guide per channel
when broadcasted
Operation/Features
- Direct access TV & Radio modes
- Free-to-air reception and Pay TV ready
- Subtitles
- Parental lock with PIN code
- Full remote-controlled
- Menu-controlled installation and
operation using On Screen Display
- 8 event VCR timers
- Automatic VCR play back:Audio L/R +
CVBS or RGB / Fast blanking
- Full range RF loopthrough
- Software upgrade via over the air
download
- Low power mode
- Sleep timer
- Alternate audio tracks
Application system resources
Processor clock speed 166 MHz
SDRAM-CPU/Video-Graphics 8 MB
Flash memory 4 MB
Terrestrial antenna interface
- RF input : IEC 169-2
female connector
- RF output (bypass): IEC 169-2 male
connector
Reception-Demodulation
- Demodulation type:
COFDM 2K/ 8K
- Network: MFN /SFN
- Input frequency range :
VHF III & UHF IV / V
- Loopthrough frequency range:
47 - 862 MHz
De-scrambling
Type: DVB
Implementation: embedded
Smart card (not supplied):1 for CA
CA system: Conax
Note: subscription is required to watch
Pay TV
Connections
TV SCART
Output: CVBS PAL or SECAM,RGB ,
Slow blanking ,
Fast blanking
S-Video (for LCD projector)
Controlled audio L/R
VCR SCART
Input: CVBS PAL or SECAM,Slow
blanking,Audio L/R,RGB / Fast
blanking
Output:CVBS PAL or SECAM,Slow
blanking during timer if "Prepare
Record" mode is activated
SVHS
Audio L/R
Audio CINCH
Analogue audio output:
L/R/Digital audio
Digital audio output:
PCM+DOLBY 5.1
Serial interface: RJ 9
Smart card reader: Type:ISO 7816
Accessories
- Remote control Type RC19336002
- SCART cable
- User manual
- Worldwide Guarantee booklet
- Batteries:2 x 1.5V type AA/R06
- RF cable
- Mains cord
Miscellaneous
- Temperature range (°C)
o Operating +5 to 45
o Storage -10 to +70
- Mains: 230 V ~ +/-10%
50 Hz
- Power consumption: 10 W max
- Standby consumption: 6 W max
- Low power mode: 1 W max
- Weight: 1.450 kg
Including packaging 2.500 kg
- Dimensions:
o Product 260x220x60 mm
o Packaging 365x305x140 mm
English
36 TECHNICAL SPECIFICATIONS
11 Technical specifications
This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC European directives.
The product complies with
the following European
council Directives:
- 73/23/EEC
- 93/68/EEC
- 89/336/EEC
Due to continued product improvements, this information is subject to change without notice.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.Manufactured under license from Dolby Laboratories.
Doc.DTR2000 version N/B 19/12/03 9:01 Page 36
To Next Page
Loading...
