1 Safety instructions 7
2 Unpacking / installing the receiver
in your existing setup 8
2.1 Unpacking 8
2.2 Installing the receiver in your existing
setup 8
3 Product description 9
3.1 Front view 9
3.2 Rear view 10
4 Preparing your remote control 11
4.1 Inserting batteries 11
4.2 Using the remote control 12
5 Connecting your digital receiver 13
5.1 Connecting to a TV using one SCART
socket. 13
5.2 Connecting to a TV and VCR both
fitted with SCART sockets 14
5.3 Connecting to your HiFi / Audio receiver
equipment.(Analogue / Digital) 15
5.4 Connecting of a Video projector to
your receiver to watch Digital TV
programmes on a video projector 15
6 Day to day operation 16
6.1 Switch your receiver on/off (low
power,standby) 16
6.2 Select TV or Radio service in running
mode 16
6.3 Change channels 16
6.3.1 Using number buttons 16
6.3.2 Using “P+”/“P-” buttons 16
6.3.3 Using the “BACK” button
(last channel recall) 16
6.3.4 Using channel lists
(Service selector) 17
6.4 Banner 17
6.5 Volume control - Vol+ / Vol- / Mute 18
6.6 Temporarily change the Subtitles
selection 18
6.7 Temporarily change the Audio
language selection 18
6.8 Guide (Event selector) 19
6.9 Recording timers 19
6.10 Using the TV/STB button 20
6.11 Watching locked channels 20
6.12 How do I reset my receiver 20
7 Changing the settings of your
receiver 21
7.1 Menus and settings 21
7.2 “Setup” menu 21
7.2.1 Channels installation 22
7.2.1.1 Update 22
7.2.1.2 Custom update 22
7.2.1.3 Full reinstallation 22
7.2.1.4 Installation success/failure 22
7.2.2 TV/VCR configuration 23
7.2.2.1 TV Format 23
7.2.2.2 TV output signal 23
English
TABLE OF CONTENTS 5
TABLE OF CONTENTS
Doc.DTR2000 version N/B 19/12/03 9:01 Page 5
To Next Page
Loading...
