All the safety and operating Instructions should
be read and understood before using the
receiver.
For best results,position your receiver away
from radiators or other heat sources.Leave a
space of at least 3 cm around the receiver for
ventilation making sure that the ventilation
holes are not obstructed.
This receiver is intended for use in a domestic
environment only and should never be
operated or stored in excessively hot,humid
or damp conditions.
Make sure no objects or fluids enter the
housing through the ventilation slots.Should
this happen,disconnect your receiver from the
mains and consult your retailer.
To clean the receiver, use a damp chamois
leather.Never use an abrasive cloth,sponge or
cleaner.
When connecting or disconnecting cables to
the receiver always ensure the receiver is
disconnected from the mains.
Please wait before connecting your receiver -
read on.
Do not disassemble the equipment.There are
no user serviceable parts.
Mains connection
Before connecting the receiver to the mains,
check that the mains supply voltage
corresponds to the voltage printed on the rear
of the receiver. If the mains voltage is different,
consult your dealer.
Please wait before connecting your
receiver - read on.
English
SAFETY INSTRUCTIONS 7
1 Safety instructions
Doc.DTR2000 version N/B 19/12/03 9:01 Page 7
To Next Page
Loading...
Need help?
General
