Phoenix Contact FL SWITCH LM 8TX-E - Rfc1213-Mib - Mib II

FL SWITCH LM ...
3-24
PHOENIX CONTACT 7278_en_04
3.3.3 RFC1213-MIB - MIB II
3.3.3.1 System group (1.3.6.1.2.1.1)
The system group has mandatory characters for all systems. It contains system-specific
objects. If an agent does not have a value for a variable, the response is a string with
length 0.
(1) system
–(1) sysDescr
–(2) sysObjectID
–(3) sysUpTime
–(4) sysContact
–(5) sysName
–(6) sysLocation
–(7) sysServices
–(8) sysORLastChange
sysDescr
sysObjectID
sysUpTime
OID 1.3.6.1.2.1.1.1.0
Syntax Octet string (size: 0 - 255)
Access Read
Description A textual description of the entry. The value should contain the full name and version
number of:
- Type of system hardware
- Operation system software
- Network software
The description may only consist of ASCII characters that can be printed.
OID 1.3.6.1.2.1.1.2.0
Syntax Object identifier
Access Read
Description The authorization identification for the manufacturer of the network management subsystem,
which is integrated in this device. This value is located in the SMI enterprises subtree
(1.3.6.1.4.1) and describes which type of device is being managed. For example, if the
manufacturer "Phoenix Contact GmbH" is assigned subtree 1.3.6.1.4.1.4346, it can then
assign its bridge the identifier 1.3.6.1.4.1.4346.2.1.
OID 1.3.6.1.2.1.1.3.0
Syntax TimeTicks
Access Read
Description The time in hundredths of seconds since the last network management unit reset.